Graphene & 2D Materials
Substrates and processing equipment for working with graphene and other 2D materials.
Graphene and 2D materials
Graphene and 2D materials have emerged as promising candidates for transparent and flexible electrodes, electrochemical capacitor devices for energy storage, anticorrosion coatings. Potentially graphene and 2D materials could also be used for biomedical applications such as tissue engineering, sensors and drug deliveries and aerospace applications. Due to its extraordinary properties and relatively low cost, graphene and its derivatives have opened the window of opportunity for researchers to develop materials and devices with novel functionalities and to improve the quality of existing products.
Graphene OxideFrom £100
Graphene Oxide - Nitrogen-DopedFrom £147
Reduced Graphene OxideFrom £201
Molybdenum DisulfideFrom £149
Tungsten DisulfideFrom £147
Prefabricated test chips for OFET, graphene and sensing
Fully fabricated test chips complete with source, drain and gate connections and optional interface monolayers. Just add your semiconductor and measure.
Prefabricated OFET Test Chips (Low Density)
The prefabricated low-density substrates are compatible with Ossila's FET test board (E222) and FACT1 System to make mobility screening quick and simple.
Prefabricated OFET Test Chips (High Density)
Mobility screening is made quick and simple with our prefabricated high density substrates; simply spin on your semiconductor to create up to 20 OFETs which can be tested within minutes using our high-density OFET test board.
High-Density OFET Test Chips (Platinum)
Ossila's new range of platinum test chips are designed to save you time and money. Our titanium/platinum coatings provide an extremely robust contact and channel allowing it to withstand cleaning procedures such as solvent sonication, plasma etching, and swabbing. This allows the test chips to be reused multiple times for testing various materials saving a significant amount of time and money. Mobility...
Ultra-flat substrates for graphene and 2D material processing
Substrates with exceptionally low surface roughness to build graphene based devices on.
Ultra-flat Quartz Coated Glass
These ultra-flat glass substrates are coated with a 20 nm layer of synthetic quartz.
Silicon Oxide Substrates and Wafers
Silicon substrates designed for use in organic electronics labs as FET substrates, and other applications including X-ray studies, surface microscopy analysis and elipsometry measurements.
Solution processable OFET and sensor substrates
Substrates with pre-patterning of the ITO to act as a source and drain contacts. Allows for entirely solution processed OFETs, sensors and chemiresistors and more with no need for vacuum processing.
Graphene Processing and Measurement Equipment
The spin coater comes with one complimentary spin coater chuck. Please indicate which of our range of stock spin coater chucks you would like when placing your order. We can also provide you with custom-milled chucks to fit your own substrate system (custom chucks are £50 extra with the purchase of a spin coater). Please contact us to discuss options. Spin coating made easy: the Ossila...
UV Ozone Cleaner
UV Ozone Cleaner Ossila's UV Ozone cleaning system is capable of removing contamination on the surface of samples, providing you with ultraclean surfaces within minutes. By using a high power UV light source ozone is generated which then breaks down surface contaminants into volatile compounds. These volatile compounds evaporate from the surface leaving no trace. This method can produce near-atomically clean...
X100 Source Measure Unit (Source Meter)
Xtralien X100 Product Description - Source Measure Unit The Xtralien X100 incorporates two source measure units (source-meters) and two precision voltage meters. It is capable of measuring a wide range of research devices including photovoltaics, LEDs and OLEDs, transistors and more.
A multi-purpose probe station, to simplify and speed up measurement. By using interchangeable probes, pre-aligned for a variety of substrate architectures, it becomes quicker and easier to measure: OFET & TFT mobility, Chremiresistor & chemiFET sensors, Sheet resistance and four point probe characterisation, Graphene and 2D characterisation (IV curves and field effect measurements).
A range of supplementary substrates for performing activities such as UV Vis absorption and photoluminescance measurements, ellipsometry, mobility and stability measurements and many more...
Ultra-flat Quartz Coated GlassFrom £72
Silicon Oxide Substrates and WafersFrom £349
ITO Glass Substrates (Unpatterned)From £99
Interdigitated ITO Substrates for OFET and SensingFrom £425
FTO Coated Glass (Unpatterned)From £126