Spectroelectrochemical Cuvette Cell Setup

Captions

---

1. UV-Vis Spectroelectrochemical Cells assembly Guide
2. C2051M1- SEC Cell with Platinum Mesh Working Electrode
   
3. Electrodes included with our Spectroelectrochemical Cells
   
4. C2051P1- SEC Cell with Working Electrode Holder
   
5. Let’s quickly see how to assemble C2051M1 cell
   
6. Quartz Cell: 200 μL capacity and 2 mm Optical path length
   
7. Reference Electrode (RE) Assembly : Start by putting the electrode though the centre of the PTFE cap before carefully pushing the O-ring onto it and up to the inside of the cap
   
8. Working Electrode (WE) Assembly:  Push the top though from the underside of the cap
   
9. Make sure the WE is place well inside the cavity with the narrow optical path
   
10. Narrow Optical Path through Electrolyte allows minimum signal loss.
    
11. Counter Electrode (CE) Assembly : Push the wire of the electrode though from the top of the cap
    
12. Make sure WE and CE are not touching and short circuiting
    
13. You can also assemble C2051P1 cell similarly
14. C2051P1 and C2051M1 are sold separately

For further assistance, contact us via the product page or at support@ossila.com

Related Products

---

Collections

---