How to connect Electrical Legs to Substrates
Connection Guide
- Cut 2 strips of connection legs, one for each side of your device.
- The number of legs should be equal to the number of pixels on your device.
- With sandpaper, gently file down the edges on the uncoated side of your device.
- Align the edge of your device with the connection clips, and press vertically until the device “clips” in.
- Make sure the illuminated side faces away from the legs Carefully snip the far side of the connection leg in a straight line so they are an even length
- Finally, press on the connecting bar until it breaks. Be careful not to put pressure on the legs.
- This should be repeated for the other side, ensuring that all the legs are the same length.