How to Attach the Slot Die Coater Roll Attachment
Captions
- Attach the roller to the plate below the stage, using the provided M3x12 mm bolts, spacers, and toothed washers.
- The spacers must be placed between the slot die and the roller, while the toothed washers must be between the bolt and roller.
- Attach the clamp to the other end of the stage by the front of the slot die coater using the provided knobs.
- Ensure that the provided flat washers are inserted through the knobs and twist knobs into the stage with the clamp in place.
- You may loosen the knobs to temporarily remove the clamp by pivoting it off the other fixed knob.
The slot die coater roll attachment is compatible with the version 2 slot die coater only.
Slot Die Coater
