Coverslips, also known as Encapsulation Glass Slides, are part of the encapsulation system used with our OLED/OPV ITO patterned substrates.
They provide robust protection for manual handling of a completed device and prevent direct oxygen/water ingress, allowing for storage and measurement under ambient conditions for several weeks (edge ingress will eventually occur).
Coverslips for 20mm x 15mm Substrates
|Size||12 mm x 15 mm|
|Applicable substrates||S101, S211, S171, S111|
Coverslips for 25mm x 25mm Substrates
|Size||17 mm x 25 mm|
|Applicable substrates||S2006B, S2006C|
Coverslips for 75mm x 25mm Substrates
|Size||17 mm x 75 mm|
|Applicable substrates||S241, S251, S281|
The glass coverlips are designed to be used with our Encapsulation Epoxy (E132) to encapsulate completed LED/PV devices in order to prevent damage to the active pixels, as is demonstrated in the schematic below.
To the best of our knowledge the information provided here is accurate. However, Ossila assume no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, pharmaceuticals, cosmetics, food or commercial applications.