Glove Box Nitrile O-Rings

Equipment Accessories, Glove Box and Components

Replacement Nitrile O-rings for the Ossila Laboratory Glove Box

Full set of O-rings that offer great air sealing

Glove Port O-Rings

The glove port O-ring kit provides you with a full set of replacement O-rings for securing your gloves to the Ossila Laboratory Glove Box. Each O-ring is specifically sized to allow for a tight secure fit on the glove port ensuring the gloves remain in place. Each kit comes with 4 O-rings, allowing you to use 2 for each port.

Specification

O-Ring Material	Nitrile
O-Ring Thickness	5 mm
O-Ring diameter	190 mm
Quantity in Kit	4

Antechamber Door O-Rings

The antechamber door O-ring kit is a set of replacement O-rings for the antechamber doors on the Ossila Laboratory Glove Box. Each O-ring is specifically sized for the doors, while the hardness ensures a complete seal across the face. Each kit comes with 2 O-rings, allowing you to replace the seals on both doors.

Specification

O-Ring Material	Nitrile
O-Ring Thickness	4 mm
O-Ring Diameter	208 mm
Quantity in Kit	2

Resources and Support

How to Replace Glove Box Gloves

Gloves used in a glove box must be flexible and relatively thin to allow movement within the main chamber. However, they must also provide adequate ingression protection. Therefore, the glove box gloves will be the most vulnerable exposure point within your glove box as small holes and tears can easily occur.

Learn more...

Glove Box Standard Operating Procedure

Working safely within an inert atmosphere glove box requires the care and co-operation of everyone who uses it. For this reason, we recommend outlining a standard operating procedure for your laboratory.