ITO Glass Substrates, 20 x 15 mm, PV and OLED

ITO Glass Photovoltaic Substrate

Quality assured

Expert support

Volume discounts

Fast and secure

Pre-patterned ITO Glass substrates for OPV/OLED testing. Use with our multi electrode cathode deposition mask to create 8 individual pixels or single electrode deposition mask to create a single large pixel.

Specifications

Substrate size	20 mm x 15 mm
Thickness	1.1 mm
Glass type	Polished soda lime, float glass
Substrate coating	Fully oxidized ITO
ITO thickness	100 nm
ITO resistance	20 Ω / square
Glass roughness	< 1 nm RMS (By AFM)
ITO roughness	1.8 nm RMS (By AFM)

ITO photovoltaic substrate (8 pixel) schematic — Schematic of an ITO photovoltaic substrate (8 pixel)

Characterisation

AFM scan of ITO substrate — Left: 10 µm x 10 µm AFM scan with Z-scale of ±5 nm. Right: AFM of glass surface (1 µm x 1 µm x 3.5 nm). Courtesy of Richard T Grant.

AFM of glass surface of ITO substrates — Left: 10 µm x 10 µm AFM scan with Z-scale of ±5 nm. Right: AFM of glass surface (1 µm x 1 µm x 3.5 nm). Courtesy of Richard T Grant.

Transmittance of ITO Substrates

ITO Transmittance

To the best of our knowledge the information provided here is accurate. However, Ossila assume no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, military, pharmaceuticals, cosmetics, food, or commercial applications.

Return to the top