ITO Glass Substrates, 20 x 15 mm (Legacy, Generation II)
Pre-patterned ITO substrates for OPV/OLED testing. Use with our E345 cathode deposition mask to create six small pixels with areas 4 mm2 each or use our E346 mask to create a single large pixel of 50 mm2. Optional active area deposition masks (E355/E356) also available to enable vacuum deposition of active layers or inter-layers.
There is a newer version of this product. Our generation I and II substrates and masks will be discontinued soon and are only available while stocks last. Please contact us for further details.
Datasheet
Substrate size | 20 mm x 15 mm |
---|---|
Thickness | 1.1 mm |
Pixel dimensions (with E345 small cathodes) | 2 mm x 2 mm (4 mm2) |
Pixel dimensions (with E346 large cathodes) | 10mm x 5mm (50 mm2) |
Glass type | Polished soda lime, float glass |
Substrate coating | Fully oxidized ITO |
ITO thickness | 100 nm |
ITO resistance | 20 Ω / square |
Glass roughness | <1 nm rms By AFM |
ITO roughness | 1.8 nm RMS (By AFM) |





To the best of our knowledge the information provided here is accurate. However, Ossila assume no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, pharmaceuticals, cosmetics, food or commercial applications.