Gate Deposition Mask, Low Density
An evaporation mask for deposition of gate contacts. For use with the low density OFET system. A 200 μm standoff-spacer ensures that the mask does not touch the substrate while still enabling good deposition resolution.
Mask with direct contact (no spacer): For sputtering and other non-directional deposition systems, as well as for thermal deposition systems with oblique angles or a very short throw, we recommend the use of the direct contact mask to get well-defined edges.
Mask with 200 μm spacer: For normal thermal evaporation systems we recommend the use of masks with the 200 μm spacer to help avoid scratches and allow better out-gassing.
|Size||75 mm x 75 mm|
|Width||1.9 mm (exc. bolts)|
To the best of our knowledge the information provided here is accurate. However, Ossila assume no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, pharmaceuticals, cosmetics, food or commercial applications.