Slot-Die Coater Accessories
Ossila's Slot-Die Coater comes with a range of accessories included with the system. However, it can be beneficial to have additional accessories to speed up the processing of devices, reduce chances of cross contamination, or to allow for the processing of a wider variety of solutions and parameters. Below is the full range of accessories that can be purchased to go alongside the slot die coating system.
For transferring the solution between the disposable syringe and the slot die head a section of tubing is required. Ossila sells pre-assembled PTFE tubing with Luer connections already attached. Having separate tubing for each different material being used reduces the chance of cross contamination and improves the reproducibility of experiments.
|Tubing Length||300 mm (12 inch)|
|Tubing Diameter||1.5 mm (1/16 inch)|
|Connector Types||Luer Lock|
|Pack Size||5 Tubes|
Slot-die coating heads require the use of shims to define the coating width. Shims can also be used as spacers to separate the sections of the heads to change the internal pressure for higher flow rates or more viscous solutions. Ossila sell slot-die shims in packs of 5 with predefined coating widths of 25 mm and 50 mm. Custom shim widths are available upon request. A full list of in stock shim designs can be found here.
|Shim Material||Stainless Steel|
|Coating Width||25mm or 50mm: Custom widths available|
|Shim Thickness||0.1 mm|
|Number Per Pack||5|
Slot-die coating heads provide channels for the even distribution of solution across the width of coating. The shape of the lips at the exit to the head can help to stabilize the coating bead and provide improved coating quality. Combined with the slot-die shims, the slot die head, can provide even coating across a wide range of different coating rates and solution viscosities.
|Head Material||Stainless Steel|
|Head Width||70 mm|
|Input Adaptor||5 mm threaded screw; Threaded screw to Luer lock connection adaptor provided|
To the best of our knowledge, the technical information provided here is accurate. However, Ossila assume no liability for the accuracy of this information. The values provided here are typical at the time of manufacture and may vary over time and from batch to batch.