High quality substrates form the basis of any high quality device or measurement. We have a range of substrates to cover all the common lab activities from device fabrication to measuring PL, ellipsometry, sensing and many more.
Photovoltaic Substrate (8 Pixel) System Components
Substrates and associated deposition masks for fabricating perovskite photovoltaics (also useful for OLEDs and OPV).
LED and OLED substrates (pixelated anode)
Substrates (and substrate packs) along with associated processing masks for the fabrication of lab scale OLEDs. Please note that these substrates can also be used for fabricating photovoltaics, however due to the increased current densities of newer generation thin-film photovoltaics the series resistance of the ITO becomes more important and so we now recommend the 8 pixel photovoltaic substrates
Solution processable OFET and sensor substrates
Substrates with pre-patterning of the ITO to act as a source and drain contacts. Allows for entirely solution processed OFETs, sensors and chemiresistors and more with no need for vacuum processing.
Scale-up and Mini-module Substrate System
Designed for blade coating, spray coating, slot die coating and other large area deposition techniques. Made to produce OLEDs and OPVs as individual pixels or as mini-modules, or larger scale OFETs.
Prefabricated test chips for OFET, graphene and sensing
Fully fabricated test chips complete with source, drain and gate connections and optional interface monolayers. Just add your semiconductor and measure.
Prefabricated OFET Test Chips (Low Density)
The prefabricated low-density substrates are compatible with Ossila's FET test board (E222) and FACT1 System to make mobility screening quick and simple.
Prefabricated OFET Test Chips (High Density)
Mobility screening is made quick and simple with our prefabricated high density substrates; simply spin on your semiconductor to create up to 20 OFETs which can be tested within minutes using our high-density OFET test board.
High-Density OFET Test Chips (Platinum)
Ossila's new range of platinum test chips are designed to save you time and money. Our titanium/platinum coatings provide an extremely robust contact and channel allowing it to withstand cleaning procedures such as solvent sonication, plasma etching, and swabbing. This allows the test chips to be reused multiple times for testing various materials saving a significant amount of time and money. Mobility...
A range of supplementary substrates for performing activities such as UV Vis absorption and photoluminescance measurements, ellipsometry, mobility and stability measurements and many more...
Ultra-flat Quartz Coated GlassFrom £72
Silicon Oxide Substrates and WafersFrom £349
ITO Glass Substrates (Unpatterned)From £99
Interdigitated ITO Substrates for OFET and SensingFrom £425
FTO Coated Glass (Unpatterned)From £126
Specialist consumables to handle and clean substrates.
Substrate Rack for Cleaning and StorageFrom £12.30
Annealing and Cleaning BeakerFrom £79
Precision Tweezers (Acid Safe)From £3.15
Electrical Connection Legs for ITO Glass SubstratesFrom £59
Capacitance Meter for Measuring Dielectric ThicknessFrom £24.42
Cleanroom Swabs (substrate wiping)From £8
Encapsulation Coverslips for Photovoltaics and OLEDsFrom £49
Encapsulation Epoxy for Photovoltaics and OLEDsFrom £69
Hellmanex III for Critical CleaningFrom £12.21
Legacy Substrate Systems
Older substrate designs that have now been updated or depreciated but remain available for research continuity or specialist needs.