Measurement Aperture Mask, 20 x 15 mm
A measurement aperture mask with electrochemically-etched holes to define the active area of a pixel during measurement and to stop indirect/scattered light when using our push-fit connection boards. Useful for OPV measurements under solar simulators or OLEDs with luminance meters. For use with our 8 Pixel OPV/OLED substrates (S211). Comes in either8-pixel or single-pixel form.
|Apertures||8 x 2.56 mm2|
|Outer dimensions||15 mm x 20 mm x 0.2 mm|
Measurement aperture mask (left). Technical drawing (right)
|Aperture||40.05 mm 2|
15 mm x 20 mm x 0.2 mm
Measurement aperture (left). Technical drawing (right)
To the best of our knowledge the information provided here is accurate. However, Ossila assume no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, military, pharmaceuticals, cosmetics, food, or commercial applications.