Luer Lock PTFE Tubing
High-quality PTFE tubing for transferring solution
Luer Lock PTFE tubing available to purchase in pack of 5
To transfer the solution between a disposable syringe and the slot-die head when slot-die coating, or from the syringe pump to the spin coater when spin coating, a section of tubing is required.
For convenience, we sell pre-assembled PTFE tubing with Luer connections already attached. Having separate tubing for each different material being used reduces the chance of cross contamination and improves the reproducibility of experiments.
Specifications
| Tubing Material | PTFE |
| Tubing Length | 400 mm |
| Tubing Diameter (I.D) | 1.5 mm (1/16 inch) |
| Connector Types | Luer Lock |
| Connector Material | Polypropylene |
| Pack Size | 5 Tubes |
Syringe Pumps
- High Qualtiy
- Single and Dual Models
- Unbeatable Value
Prices from £1,900.00
Syringe Pump Accessories
Processing Equipment
Spin Coater Bundle Deal
The Spin Coater Syringe Pump bundle includes both the Ossila Spin Coater and either our single syringe pump or dual syringe pump for an unbeatable price. Additionally, the bundle includes 15 Norm-Ject Disposable Luer Lock Syringes (5 ml), 5 lengths of PTFE tubing, 50 blunt needles, and an adapter that holds the needles in position in the spin coater dispense hole.
Spin Coater Syringe Pump Bundle
- Produce High-Quality Coatings
- Unbeatable Value
- Free Connector
Available From £4200.00
To the best of our knowledge the information provided here is accurate. However, Ossila assume no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, pharmaceuticals, cosmetics, food or commercial applications.