PH 1000 PEDOT:PSS
CAS Number 155090-83-8
Organic Conductors, PEDOT:PSS (Poly(3,4-ethylenedioxythiophene) Polystyrene Sulfonate)
Quality assured
Expert support
Volume discounts
Worldwide shipping
Fast and secure
High Conductivity PEDOT:PSS Formulation
Used for applications in OPV, OLED, and perovskite solar cells
Clevios™ PH 1000 PEDOT:PSS is designed for applications where high conductivity and optical transparency are required. The potential uses for high conductivity PEDOT:PSS formulations include replacements for ITO, semitransparent top electrodes in thin film electronics, top gate electrodes in FETs, and for use as a thick planarization layer on rough surfaces such as FTO. Sheet resistances as low as 300 Ω/square can be achieved with the addition of conductivity enhancement agents such as dimethyl sulfoxide and ethylene glycol.
Optical transparency
Ideal for interfacial layers
Versatile use
Applications in OPV, OLED and perovskite solar cells
High quality
Quality Formulation
High Conductivity
Tailored High conductivity
Technical Data
| Solvent | Water |
| Composition | PEDOT/PSS (1:2.5 w/w) |
| CAS Number | 155090-83-8 |
| Solid Content | 1.0 – 1.3 wt.% |
| Work Function | 4.8 – 5.0 eV |
| Resistivity | < 0.0012 Ω.cm |
| Conductivity | High conductivity, 850 S/cm after the addition of 5% dimethyl sulfoxide (dried coating) |
| Particle Size Distribution | D50 = 30 nm |
| Viscosity | 15 – 60 mPa.s |
| pH Value | 1.5 – 2.5 |
| Packaging | 100 ml of solution sealed in a light resistant bottle with temperature indicator |
| Storage | 5 – 10 °C |
Spin Speed Data
PH 1000 Spin Speed / Film Thickness
MSDS Document
PH 1000 PEDOT:PSS MSDS SheetWe stock a wide range of PEDOT:PSS. Please contact us if you cannot find what you are looking for.
To the best of our knowledge the information provided here is accurate. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. Products may have minor cosmetic differences (e.g. to the branding) compared to the photos on our website. All products are for laboratory and research and development use only.