PDCBT, highly efficient fullerene free polymer solar cells
High quality and high purity semiconducting polymer available online for priority dispatch
PDCBT is a medium-to-wide bandgap polymer semiconductor that belongs to the polythiophene family. With two electron-withdrawing carboxylate side groups, PDCBT is relatively electron deficient when it is compared with P3HT. PDCBT has a main absorption peak (in film) located at 551 nm, 37 nm red-shifted compared to that of P3HT.
PDCBT has been used in highly efficient fullerene free polymer solar cells. These have achieved device power conversion efficiency of 10.16% with ITIC used as the non-fullerene acceptor . Ta-WOx doped PDCBT has been reported as efficient low-loss hole transport layer in hybrid organohalide lead perovskite solar cell not only to enhance the device performance achieving maximum efficiencies of 21.2% but also offering more than 1000 hours of light stability with almost 95% of its efficiency maintained 
Device structure: ITO/C60-SAM/perovskite/PDCBT/Ta-WOx/Au
|Thickness (nm)||VOC (V)||JSC (mA cm-2)||FF (%)||PCE (%)|
Luminosyn™ PDCBTLuminosyn™ PDCBT is now available.
D18 (PCE18) is purified via Soxhlet extraction with acetone, hexane, and chloroform under an argon atmosphere
Large quantity orders
Plan your experiments with polymers from the same batch and batch-specific GPC data
|Full name||Poly[2,2''''-bis[[(2-butyloctyl)oxy]carbonyl][2,2':5',2'':5'',2'''-quaterthiophene] -5,5'''-diyl]|
|HOMO / LUMO||HOMO = -5.26 eV, LUMO = -3.0 eV |
|Solubility||Chloroform, chlorobenzene and dichlorobenzene|
|Absorption*||λmax 551 nm (in film) |
|Form||Brown reddish flakes/powders|
|Melting point||Tm = 282 °C (lit.)|
|Classification / Family||Polythiophenes, Organic semiconducting materials, Medium-to- wide bandgap polymers, Organic photovoltaics, Polymer solar cells, Perovskite solar cells, Hole-transport layer materials, NF-PSCs, All-polymer solar cells (all-PSCs).|
|M2233A1||5 g / 10 g*||Please contact us for details|
* Lead time of 4-6 weeks.
Literature and Reviews
- Visible Sensitization for Non-Fullerene Polymer Solar Cells Using a Wide Bandgap Polymer, Y. Wang et al., J. Photopolym. Sci. Technol., 31 (2), 177-181 (2018); doi: 10.2494/photopolymer.31.177.
- A polythiophene derivative with superior properties for practical application in polymer solar cells, M. Zhang et al., Adv. Mater., 26(33), 5880-5885 (2014); DOI: 10.1002/adma.201401494.
- Thermal behaviour of dicarboxylic ester bithiophene polymers exhibiting a high open-circuit voltage, R. Heuvel et al., J. Mater. Chem. C, 6, 3731--3742 (2018); DOI: 10.1039/c7tc04322h.
- Ternary Blend Polymer Solar Cells Based on Wide-Bandgap Polymer PDCBT and Low-Bandgap Polymer PTB7-Th, H. Kim et al., Chem. Lett., 47(8), 1059-1062 (2018); doi: 10.1246/cl.180420.
- Fine-tuning the side-chains of non-fullerene small molecule acceptors to match with appropriate polymer donors, M. Chang et al, J. Mater. Chem. A, 6, 8586 (2018); DOI: 10.1039/c8ta00764k.
- Highly Efficient Fullerene‐Free Polymer Solar Cells Fabricated with Polythiophene Derivative, Y. Qin et al., Adv. Mater., 28, 9416-9422 (2016); doi: 10.1002/adma.201601803.
- A generic interface to reduce the efficiency-stability-cost gap of perovskite solar cells, Y. Hou et al., Science, 358 (6337), 1192-1197 (2017); DOI: 10.1126/science.aao5561.
To the best of our knowledge the information provided here is accurate. However, Ossila assume no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, pharmaceuticals, cosmetics, food or commercial applications.