ITO Glass Substrate Pack, 20 x 15 mm (Legacy, Generation I)
Ossila's substrate packs contain the substrate consumables required for making and testing 100 fully encapsulated OLEDs and OPVs for measurement under ambient conditions:
- Pre-patterned ITO Glass Substrates (S101) - 100 (1 pack of 100)
- Electrical connection legs (E242) - 1000 (200 strips of 5 legs)
- Encapsulation Coverslips (C181) - 100 (1 pack of 100)
- Encapsulation Epoxy (E132) - 10ml
Ossila's pixelated cathode substrate packs have been designed to make fabrication and measurement of high-performance OLEDs and OPVs as easy and reliable as possible.
Our ready-made patterned ITO substrates are manufactured from commercial grade ITO, used in the flat-panel display industry in order to ensure high consistency and very low defect rates.
Meanwhile, our encapsulation epoxy has been proven not to damage delicate polymers or reactive layers (such as calcium).
A glass slide provides robust protection for manual handling and prevents direct oxygen/water ingress. This allows for storage and measurement under ambient conditions for several weeks (edge ingress will eventually occur).
Finally, our electrical connection legs make reliable contact with the ITO and are on a standard 0.1 inch (2.54 mm) pitch, allowing use in standard prototyping breadboards.
To the best of our knowledge the information provided here is accurate. However, Ossila assume no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, pharmaceuticals, cosmetics, food or commercial applications.