FREE shipping to on qualifying orders when you spend or more. All prices ex. VAT.

OFET Test Board for High Density OFETs

All Measurement Equipment, Electrical Test Boards, Substrates and Fabrication

Product Code P2014A1
Price $1,188 ex. VAT

Quality assured

Expert support

Volume discounts

Worldwide shipping

Fast and secure

The High Density OFET Test Board can provide high precision, current-voltage measurements of up to 20 OFETs on a single substrate. As such, this test board can speed up your research and help you to achieve more reliable, statistical results. It is compatible with our Prefabricated High Density OFET Substrates.

System overview

Until now, high density OFETs had to be tested using a mechanical needle probe station which was a delicate and laborious process. The substrate bracket on this board features 20 gold-plated, spring-loaded pogo connectors to make a reliable electrical contact with each device on the substrate. Not only does this make the testing process simpler and faster, but it also ensures uniform electrical contact with every single substrate tested.

The substrate to be tested is simply dropped into the testing holder and secured in place with a swivel push-fit lid. The optical window then provides access for photosensitivity, photodoping and sensing measurements if needed.

OFET measurements are made using two source measure units (SMUs) connected via BNC connector cables: one to set the gate voltage and measure any gate leakage current; the second to set the source-drain voltage and measure the current.

The board is also neat and compact at just 200 mm2 which is small enough for easy use within a glove box. This product is covered by our FREE 2-year warranty.

High density test board
High Density OFET Test Board diagram.

Features and Specifications

SMU connection Twin BNC connectors: Channel B = source/drain connection; Channel A = gate connection
OFET connection 20 gold-plated, spring-loaded pogo connectors
Source-Drain switches 20 independent switches to Channel B; one per device.
Gate switches 8 independent switches to Channel A
Optical window For experimental access: optoelectrical measurements; device illumination (sensing/doping); microscope inspection
Dimensions L x W = 200 mm x 100 mm

Noise reduction and electrical isolation

The High Density OFET Test Board has been designed to reduce non-negligible error, which often occurs as a result of stray capacitance, electromagnetic noise and difficulty isolating the test components (BNC cables, switches, board). Our test board has the following features to enable precision low-current measurement:

  • Double ground plane – to reduce electromagnetic pickup from the environment
  • Intelligent wire tracks – designed to reduce noise, leakage current and stray capacitance
  • “Ideal” switch selection – proven to show almost no extra resistance to current flow when ON, and does not introduce leakages current when OFF

Compatible Products

The High Density OFET Test Board has been designed to be compatible with our Prefabricated High Density OFET Substrates.

Prefabricated substrates can reduce OFET fabrication time - simply deposit your semiconductor on top - making them ideal for high throughput screening where reliable statistics are required. The High Density OFET substrates in particular allow for statistical data to be collected, with reduced variability between OFETs and reduced cost and processing time per OFET device with 20 devices on a single substrate. See all the available HD OFET substrate variants.

If you prefer to fabricate your own OFETs, you can use our high density OFET fabrication system which contains all the relevant components needed including substrates, interchangeable masks, lower support and lid.

High density OFET system High Density OFET test chip (finished)
Evaporation Stack for HD OFET System and our Prefabricated HD OFET Substrates.

To the best of our knowledge the information provided here is accurate. However, Ossila assume no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. Products may have minor cosmetic differences (e.g. to the branding) compared to the photos on our website. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, military, pharmaceuticals, cosmetics, food, or commercial applications.

Return to the top