Low price, high purity DPPyA
Electron transport layer material with high electron mobility
DPPyA, or 9,10-bis(6-phenylpyridin-3-yl)anthracene, consists of an anthracene core joined by two phenylpyridine units. With two adjacent pyridine units, it is electron deficient. As a result, DPPyA is normally used as an electron transport layer material, either by itself, or together with Liq as dual electron transport layer materials in organic light-emitting diodes.
The pyridine units of DPPyA not only facilitate charge injection, but also enhance the electron-transporting mobility, benefitting from the closely packed molecules induced by the intermolecular H---N hydrogen bonding. DPPyA achieved high electron mobility of 1.5 × 10− 3 cm2/Vs under the electric field of 5.5 × 105 V/cm due to the existence of good molecular stacking.
Owing to its high electron mobility, lower operation voltages and high current densities can be observed in devices with DPPyA as electron transport layer material.
|Molecular weight||484.59 g/mol|
|Absorption||λmax 379, 401 nm|
|Fluorescence||λem 439 nm|
|HOMO/LUMO||HOMO = 5.9 eV, LUMO = 3.0 eV |
|Classification / Family||Anthracene derivatives, electron transport layer materials, sublimed materials, TADF materials, OLEDs, organic electronics|
|Melting point||Tg = 135 °C,|
Sublimation is a technique used to obtain ultra pure-grade chemicals. For more details about sublimation, please refer to the Sublimed Materials for OLED devices page.
|Device structure||(ITO)/HATCN (5 nm)/NPB (30 nm)/BCzPh (10 nm)/α,β-ADN:x wt% pSFIAc2 (30 nm)/CzPhPy (20 nm)/DPPyA (20 nm)/LiF (0.5 nm)/Al (150 nm) |
|Max. Power Efficiency||5.2 lm W−1|
|Device structure||(ITO)/HATCN (4.2 nm)/NPB (30 nm)/TCTA (10 nm)/mCP (10 nm)/mCBP:20 wt% TCTPCF3:1 wt% TCz-BN1 (30 nm)/CzPhPy (10 nm)/DPPyA (30 nm)/LiF (1 nm)/Al (100 nm) |
|Max. Current Efficiency||31.1 cd/A|
|Max. Power Efficiency||22.2 lm W−1|
|Device structure||(ITO)/HATCN (4.2 nm)/NPB (30 nm)/TCTA (10 nm)/mCP (10 nm)/mCBP:20 wt% DACT-II:5 wt% TCz-BN2 (30 nm)/CzPhPy (10 nm)/DPPyA (30 nm)/LiF (1 nm)/Al (100 nm) |
|Max. Current Efficiency||81.1 cd/A|
|Max. Power Efficiency||79.7 lm W−1|
|Sublimed (>99%)||M2356A1||250 mg||£330|
|Sublimed (>99%)||M2356A1||500 mg||£520|
|Sublimed (>99%)||M2356A1||1 g||£850|
Literature and Reviews
- Ultrahigh-Efficiency Green PHOLEDs with a Voltage under 3 V and a Power Efficiency of Nearly 110 lm W−1 at Luminance of 10 000 cd m−2, D. Zhang et al., Adv. Mater., 29 (40); 1702847 (2017); 10.1002/adma.201702847.
- Highly efficient and stable deep-blue OLEDs based on narrowband emitters featuring an orthogonal spiro-configured indolo[3,2,1-de]acridine structure, Chem. Sci., 2022; DOI: 10.1039/D2SC01543A.
- Multi-resonant thermally activated delayed fluorescence emitters based on tetracoordinate boron-containing PAHs: colour tuning based on the nature of chelates, G. Meng et al., Chem. Sci., 13, 1665 (2022); DOI: 10.1039/d1sc05692a.
- In situ-formed tetrahedrally coordinated double-helical metal complexes for improved coordination-activated n-doping, Z. Liu et al., Nat. Commun., 13, 1215 (2022); DOI: 10.1038/s41467-022-28921-5.
- Efficient Low-Driving-Voltage Blue Phosphorescent Homojunction Organic Light-Emitting Devices, C. Cai et al., Jpn. J. Appl. Phys. 50, 040204 (2011); DOI:10.1143/jjap.50.040204.
To the best of our knowledge the information provided here is accurate. However, Ossila assume no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, pharmaceuticals, cosmetics, food or commercial applications.