Software and Drivers
|
Equipment |
Software |
|
Source Measure Unit |
|
|
Solar Cell I-V Test System |
|
|
LED Measurement System |
|
|
OLED Lifetime System |
|
|
Four-Point Probe System |
|
|
Contact Angle Goniometer |
|
|
Potentiostat |
|
| Optical Spectrometer (vis-NIR) | Optical Spectrometer |
Front Panel
This is the latest version of the software Front Panel for the Source Measure Unit.
| Software | Version | File Size | Download |
| Ossila Front Panel | 1.2.1.1 | 42.3 MB |
Minimum System Requirements
| Operating System | Windows 10 (32-bit or 64-bit) |
| CPU | Dual Core 2 GHz |
| RAM | 2 GB |
| Available Hard Drive Space | 128 MB |
| Connectivity | USB 2.0 Ethernet |
Bug Fixes
- Fixed a bug that sometimes caused an error when detecting connected systems.
I-V Curve
This is the latest version of the current-voltage measurement software for the Source Measure Unit.
| Software | Version | File Size | Download |
| Ossila IV Curve | 4.0.1.0 | 40.3 MB | Software Manual |
Minimum System Requirements
| Operating System | Windows 10 (32-bit or 64-bit) |
| CPU | Dual Core 2 GHz |
| RAM | 2 GB |
| Available Hard Drive Space | 121 MB |
| Monitor Resolution | 1680 x 1050 |
| Connectivity | USB 2.0 Ethernet (requires DHCP) |
Bug Fixes
- Fixed a bug which would cause an error when detecting SMUs with older firmware (<2.3.1).
- Fixed a bug which would reset the system address combobox when a measurement finished.
Solar Cell I-V
This is the latest version of the measurement software for the Solar Cell I-V Test System.
Please note, this version of the software is incompatible with automated versions of the system with product codes ending in 1 or 2 (e.g., T2003A2), purchased before August 2022. For these systems, use the Solar Cell I-V (Legacy) software below.
| Software | Version | File Size | Download |
| Ossila Solar Cell I-V | 2.0.0.0 | 53.5 MB |
Minimum System Requirements
| Operating System | Windows 10 (32-bit or 64-bit) |
| CPU | Dual Core 2 GHz |
| RAM | 2 GB |
| Available Hard Drive Space | 192 MB |
| Monitor Resolution | 1680 x 1050 |
| Connectivity | USB 2.0 Ethernet (requires DHCP) |
Updates
- The software has been updated to work with the new version of the Solar Cell I-V Test System - Automated.
- Please note, version 2.0.0 and newer will be incompatible with units purchased before August 2022.
Solar Cell I-V (Legacy)
This is the measurement software for Automated Solar Cell I-V Test Systems with product codes ending in 1 or 2 (e.g., T2003A2), purchased before August 2022.
| Software | Version | File Size | Download |
| Ossila Solar Cell I-V (Legacy) | 1.7.0.0 | 53.1 MB |
Minimum System Requirements
| Operating System | Windows 10 (32-bit or 64-bit) |
| CPU | Dual Core 2 GHz |
| RAM | 2 GB |
| Available Hard Drive Space | 192 MB |
| Monitor Resolution | 1680 x 1050 |
| Connectivity | USB 2.0 Ethernet (requires DHCP) |
Updates
- Added default values to settings fields for first time start up.
LED IVL
This is the latest version of the measurement software for the LED Measurement System. Please note, this software is NOT compatible with the OLED Lifetime System.
| Software | Version | File Size | Download |
| Ossila LED IVL | 3.0.0.0 | 40.4 MB |
Minimum System Requirements
| Operating System | Windows 10 (32-bit or 64-bit) |
| CPU | Dual Core 2 GHz |
| RAM | 2 GB |
| Available Hard Drive Space | 121 MB |
| Monitor Resolution | 1440 x 960 |
| Connectivity | USB 2.0 Ethernet (requires DHCP) |
- Release version.
LED I-V
This is the latest version of the measurement software for the OLED Lifetime System.
| Software | Version | File Size | Download |
| Ossila LED I-V | 2.2.1.4 | 42.4 MB |
Minimum System Requirements
| Operating System | Windows 10 (32-bit or 64-bit) |
| CPU | Dual Core 2 GHz |
| RAM | 2 GB |
| Available Hard Drive Space | 127 MB |
| Monitor Resolution | 1440 x 960 |
| Connectivity | USB 2.0 Ethernet (requires DHCP) |
New Features
- Added current range selection option for the photodiode.
- Added the option to automatically select the appropriate current range for the measurment.
Bug Fixes
- Fixed a bug that would cause the software to hang if the close button was clicked on the switching dialog box.
Sheet Resistance Lite
This is the latest version of the sheet resistance measurement software for the Ossila Four-Point Probe System.
| Software | Version | File Size | Download |
| Ossila Sheet Resistance Lite | 1.0.4.1 | 54.8 MB |
Minimum System Requirements
| Operating System | Windows 10 (32-bit or 64-bit) |
| CPU | Dual Core 2 GHz |
| RAM | 2 GB |
| Available Hard Drive Space | 193.5 MB |
| Monitor Resolution | 1440 x 900 |
| Connectivity | USB 2.0 Ethernet (requires DHCP) |
Bug Fixes
- Fixed missing sample size error messages.
Sheet Resistance
This is the old version of the sheet resistance measurement software for the Ossila Four-Point Probe System.
| Software | Version | File Size | Download |
| Ossila Sheet Resistance | 2.0.8.0 | 54 MB | Software Manual |
Minimum System Requirements
| Operating System | Windows 10 (32-bit or 64-bit) |
| CPU | Dual Core 2 GHz |
| RAM | 2 GB |
| Available Hard Drive Space | 190 MB |
| Monitor Resolution | 1440 x 900 |
| Connectivity | USB 2.0 Ethernet (requires DHCP) |
Bug Fixes
- Fixed a bug that prevented the software from starting.
Contact Angle
This is the latest version of the measurement software for the Ossila Contact Angle Goniometer.
| Software | Version | File Size | Download |
| Ossila Contact Angle | 4.1.0.0 | 59.2 MB |
Minimum System Requirements
| Operating System | Windows 10 (32-bit or 64-bit) |
| CPU | Quad Core 2.5 GHz |
| RAM | 4 GB |
| Available Hard Drive Space | 212 MB |
| Monitor Resolution | 1920 x 1080 |
| Connectivity | USB 2.0 |
Bug Fixes
- Added a start up camera connection tool
- Removed resolution and camera choice in view finder. The software now runs at the maximum resolution for the chosen camera.
- Added select camera in place of refresh camera in tools.
- UI rearrangement and improved dark theme.
Electrochemistry
This is the latest version of the electrochemistry measurement software for the Ossila Potentiostat.
| Software | Version | File Size | Download |
| Ossila Electrochemistry | 1.2.0.0 | 39.7 MB |
Minimum System Requirements
| Operating System | Windows 10 (32-bit or 64-bit) |
| CPU | Dual Core 2.5 GHz |
| RAM | 2 GB |
| Available Hard Drive Space | 120 MB |
| Monitor Resolution | 1280 x 960 |
| Connectivity | USB 2.0 |
Updates
- Increased maximum duration of open circuit potential and electrolysis measurements to 72 hours.
Optical Spectrometer
This is the latest version of the Ossila Optical Spectrometer Software for use with the Optical Spectrometer.
| Software | Version | File Size | Download |
| Ossila Optical Spectrometer | 1.1.2.0 | 66.9 MB |
Minimum System Requirements
| Operating System | Windows 10 (32-bit or 64-bit) |
| CPU | Dual Core 2 GHz |
| RAM | 2 GB |
| Available Hard Drive Space | 232.9 MB |
| Connectivity | USB 2.0 |
Bug Fixes
- Fixed a bug that renders the software unable to find spectrometers when the computer is in another language other than English.
Source Measure Unit
USB Drivers
These drivers are required use USB connectivity with our electrical test and measurement systems and the Source Measure Unit (Xtralien X100 and X200). The file contains both the 32-bit and 64-bit installers. For instructions on how to install the drivers, please see our installation guide.
| Software | Version | File Size | Download |
| Source Measure Unit USB Drivers | 2.1.00 | 800 kB |
LabVIEW Library (Legacy)
This is a collection of VIs for using the Source Measure Unit - X200 with LabVIEW 2015.
These files are no longer supported or updated. To control the Source Measure Unit with LabVIEW, serial and string commands can be used.
| Software | Version | File Size | Download |
| Source Measure Unit LabVIEW Library | 2.1.0.0 | 440 kB |
Declaration
End-user software has been developed using Qt5 under LGPLv3. If you would like copies of the Qt source libraries used, or instructions on how to link your own Qt5 library, please contact us.